Form Liner - 7 x 15 x 7 x 48 Step Form

Quick Overview
Form Liner - 7 x 15 x 7 x 48 Step Form Use two of these liners in Form (LS-STEP) with Divider (LS-STEPDVDR) to create two steps at once

Product Description


  • Place liner in the bottom of your form, relief side up.
  • Apply a light coat of World Block Plus Form Release Oil to the surface of the liner. 
  • Pour concrete into block form as usual.
  • After the block has set, strip the block from the form and set the block upright.
  • Remove the liner from the finished product.
  • Prior to using the form liner again, clean any remaining concrete off the face of the form liner.  This is best accomplished by brushing it with a stiff bristle brush.

Additional Information

Form Weight
Form Volume
Block Weight

You May Also Be Interested in the Following Product(s)