Form Liner - 6 X 24 & 6 X 18 Mid-Size Top Cap (pair)

Quick Overview
2 liners that fit in to the front and back of the top cap form. Flat sides that butt evenly against the adjoining block face.

Product Description


  • Place liner in the bottom of your form, relief side up.
  • Apply a light coat of World Block Plus Form Release Oil to the surface of the liner. 
  • Pour concrete into block form as usual.
  • After the block has set, strip the block from the form and set the block upright.
  • Remove the liner from the finished product.
  • Prior to using the form liner again, clean any remaining concrete off the face of the form liner.  This is best accomplished by brushing it with a stiff bristle brush.

Additional Information

Form Weight
Form Volume
Block Weight

You May Also Be Interested in the Following Product(s)