Form Liner - 30 x 60 x 1 River Rock

Quick Overview
INSTRUCTIONS Place liner in the bottom of your form, relief side up. Apply a light coat of World Block Plus Form Release Oil to the surface of the liner.  Pour concrete into block form as usual. After the block has set, strip the block from the form and set the block upright. Remove the liner from the finished product. Prior to using the form liner again, clean any remaining concrete off the face of the form liner.  This is best accomplished by brushing it with a stiff bristle brush.

Product Description


Additional Information

Form Weight

You May Also Be Interested in the Following Product(s)