Someone recently asked if our release agent can be stored outside in the cold. The short answer is "no." According to the Material Safety Data Sheet (MSDS) the release should be stored in a cool/dry location. Do not allow it to freeze, as the product may be damaged. And store it away from sparks and open flame.
Here is a link to the MSDS. This comes with every pail and drum of release we ship out. But, just in case you need it right now, here it is:
Storing Release Agent
Monday, December 14, 2009
0 Comments |
Posted in Landscape Blocks
Knob Blocks
Mid-Size Blocks
V-Interlock
Form Liners
By Dan Stocke
Wall Engineering
Friday, December 4, 2009
Engineering has always been an important concern when putting up landscape walls. But now it is becoming increasingly mandatory as the popularity of these walls increases. We recommend checking your local building codes before putting up any wall. Always better safe than sorry.
Download Landscape Engineering here
Mid-Size Top Cap
Tuesday, August 11, 2009
The Top Cap Form creates a block 6 inches high, 24 inches wide at the front and 18 inches wide at the back. The liners fit into the front and back of the form. When the blocks are laid head to toe they will lie straight. Laid head to head they will curve back. Laid toe to toe they will curve in. The liners have open ends so they will butt seamlessly against the adjoining block face.
0 Comments |
Posted in Mid-Size Blocks
By Joel Stocke
